제품 및 사업부 뉴스

  • A$
    {3}

    {1} {2}

    {4}

    계속 읽기
    {0}
  • Hydrostatic Pressure Test with the nVision Reference Recorder

    수요일, 12월 11, 2019 49 지난 일수

    SAN LUIS OBISPO, USA – Within natural gas systems, one of the most important methods to verify the integrity of pipelines is through the hydrostatic pressure test. Designed to test the transmission systems – one of the largest sections in a natural gas system – the hydrostatic test varies on the level of requirements. Depending on local regulations, it may require testing pressure and multiple temperatures in the pipeline for several hours prior to and after a pipe is put into service.

    계속 읽기
  • Reliable Level Measurement for the Oil and Gas Industry

    화요일, 12월 10, 2019 50 지난 일수

    SAN LUIS OBISPO, USA, Dec. 10, 2019 – Within the oil and gas industry, reliable instrumentation is critical to maximize production. Tanks holding various fluids all need level instruments that are capable of withstanding harsh environments while still providing accurate information. Depending on what each tank contains, some of these instruments also need intrinsic safety ratings. Selecting the appropriate equipment is key to assuring accurate and reliable measurement of level to avoid spills and other potentially dangerous mistakes.

    계속 읽기
  • AMETEK NCC Launches New Flexible Fryer Control

    월요일, 12월 9, 2019 51 지난 일수

    GRAND JUNCTION, CO, Dec. 9, 2019 – AMETEK National Control Corporation (NCC) — a leading supplier of electronic cooking controls — is launching the new Flexible Fryer Control (FFC), a control module that helps enhance fryer performance by interfacing directly with critical internal management systems.

    계속 읽기
  • AMETEK Process Instruments Introduces WDG-V UOP RP Analyzer for Europe and International CCR Projects

    화요일, 12월 3, 2019 57 지난 일수

    PITTSBURGH, PA, Dec. 3, 2019 – AMETEK Process Instruments has broadened its line of Thermox WDG-V series flue gas analyzers to include the WDG-V UOP/RP for oxygen measurement in continuous catalyst regeneration (CCR) platforming / catalytic reforming processes.

    계속 읽기
  • AMETEK France Opens New Technology Solutions Centre in Elancourt City

    금요일, 11월 22, 2019 68 지난 일수

    ÉLANCOURT, FRANCE Nov. 22, 2019 – AMETEK France has established a Technology Solutions Centre as a regional headquarters in Élancourt City to support the growth of its electronic instrument and electromechanical product businesses in France.

    계속 읽기
  • AMETEK SCP Announces Partnership with BAE Systems Australia

    목요일, 11월 21, 2019 69 지난 일수

    WESTERLY, RI Nov. 21, 2019 – AMETEK SCP, a leader in highly reliable interconnect solutions, has selected BAE Systems Australia to support the development of a new defense capability for Australia’s future Attack Class submarine fleet.

    계속 읽기
  • AMETEK VIS Launches New C-COM 10.1 Inch GX-100 Display

    화요일, 11월 19, 2019 71 지난 일수

    GRAND JUNCTION, CO, Nov. 19, 2019 – AMETEK Vehicular Instrumentation Systems (VIS), the industry leader in custom dashboard instrument displays for construction and military vehicles, is proud to introduce the latest in its C-COM product line: the 10GX-100 with a 10.1-inch touchscreen display.

    계속 읽기
  • Creaform Adds ACADEMIA 50 3D scanner to its Educational Solution Suite
    Creaform(크레아폼), 교육 솔루션 제품군에 ACADEMIA 50 3D 스캐너 추가

    수요일, 9월 11, 2019 140 지난 일수

    2019년 9월 10일, 캐나다, 레비 — 신업용 휴대용 3D 측정 솔루션 분야의 세계적인 기업 Creaform(크레아폼)은 오늘 ACADEMIA 50 3D 스캐너를 ACADEMIA 교육 솔루션 제품군에 출시했다고 밝혔습니다. 이는 전문가 등급의 휴대용 3D 스캐너로, 휴대용 3D 스캐너의 장점과 역설계, 산업 설계, 품질 관리와 같은 실제 응용 분야에서의 사용법을 학생에게 제공하는 교육용으로 안성맞춤인 솔루션입니다.

    계속 읽기
  • AMETEK Eighty Four Hires Dr. Brad Richards as New Product Manager, Powders
    AMETEK Eighty Four Hires Dr. Brad Richards as New Product Manager, Powders

    수요일, 8월 28, 2019 154 지난 일수

    EIGHTY FOUR, Pa., August 27, 2019 – Specialist manufacturer of water atomized powders and clad metal plate, AMETEK SMP Eighty Four, is delighted to announce the appointment of Dr. Brad Richards as Product Manager, Powders at its operations facility in Eighty Four. Dr. Richards will be responsible for growing the company’s portfolio of water atomized and specialty metal powders, with an emphasis on developing differentiated products for new and existing customers in the automotive, industrial and defense markets.

    계속 읽기
  •  AMETEK SCP Wins Contracts Worth $7 Million for Submarine Equipment
    AMETEK SCP Wins Contracts Worth $7 Million for Submarine Equipment

    화요일, 8월 20, 2019 162 지난 일수

    WESTERLY, RI, August 15, 2019 -- AMETEK SCP, a world leader in underwater cable and connector solutions for military and commercial applications, has recently been awarded $7 million dollars in contracts from International partners to provide equipment for nuclear and diesel electric attack submarines. The orders have been split between European and Asian partners.

    계속 읽기
  •  CAMECA LAUNCHES EIKOS-UV™, THE WORKHORSE  ATOM PROBE MICROSCOPE FOR RESEARCH & INDUSTRY
    CAMECA LAUNCHES EIKOS-UV™, THE WORKHORSE ATOM PROBE MICROSCOPE FOR RESEARCH & INDUSTRY

    수요일, 8월 7, 2019 175 지난 일수

    MADISON, WI, USA – AMETEK CAMECA, a world leader in scientific instrumentation and metrology solutions, is pleased to announce the release of EIKOS-UV, a new atom probe microscope. EIKOS-UV is a workhorse Atom Probe Microscope with increased ease of use and a low cost of ownership.

    계속 읽기
  • EDAX Launches New OIM Matrix Software Package for EBSD

    목요일, 8월 1, 2019 181 지난 일수

    AMETEK EDAX, Inc., a leader in X-ray microanalysis and electron diffraction instrumentation, has introduced the OIM Matrix™ software package, which brings dynamic diffraction-based Electron Backscatter Diffraction (EBSD) pattern simulations and dictionary indexing capabilities to the EBSD market.

    계속 읽기
  • AMETEK SMP Wallingford Appoints University of Pittsburgh Graduate Hunter Stept as New Process Engineer

    목요일, 8월 1, 2019 181 지난 일수

    High-purity metal strip and wire manufacturer, AMETEK Specialty Metal Products (SMP) Wallingford, is delighted to announce the appointment of Hunter Stept as Process Engineer at its Specialty Metal Products division in Wallingford.

    계속 읽기
  • AMETEK PDS Wichita Service Center Expands  Compressor Motor Overhaul Capabilities
    AMETEK PDS Wichita Service Center Expands Compressor Motor Overhaul Capabilities

    수요일, 7월 24, 2019 189 지난 일수

    WICHITA, KS, July 23, 2019 – AMETEK PDS is continuing the expansion of its overhaul capabilities to now include the MB76A-1 and MB76C-2 Compressor Drive Motors, which are used to power climate control systems in aircrafts (alternate part numbers of 1250151 and 1134104-1).

    계속 읽기
  • AMETEK-VIS-ICM
    AMETEK VIS’ New Intelligent Control Module Enhances Vehicular Functionality Through Visual Programming Logic

    목요일, 7월 11, 2019 202 지난 일수

    AMETEK Vehicular Instrumentation Systems (VIS) — the industry leader in custom dashboard instrument displays for heavy trucks and construction, military and other vehicles — introduces the new Intelligent Control Module (ICM), a user definable module that connects with multiple vehicle systems to enhance control for end users.

    계속 읽기
  • AMETEK AMERON Receives FAA-PMA Approval for Control Knob
    AMETEK AMERON Receives FAA-PMA Approval for Control Knob

    수요일, 7월 10, 2019 203 지난 일수

    BALDWIN PARK, CA – AMERON MASS Systems, a pioneer in the development of high-performance aerospace and defense components, has received FAA-PMA approval on part number M150-900-027.

    계속 읽기
  • AMETEK AMERON Receives FAA-PMA Approval on Housing  Assembly Sensor
    AMETEK AMERON Receives FAA-PMA Approval on Housing Assembly Sensor

    목요일, 7월 4, 2019 209 지난 일수

    BALDWIN PARK, CA – AMERON MASS Systems, a pioneer in the development of high-performance aerospace and defense components, has received FAA-PMA approval on its housing assembly sensor, part number M33370101-2.

    계속 읽기
  •  The New Phantom S640 Brings Up to 6Gpx/sec (75Gbps) for  Machine Vision Applications
    The New Phantom S640 Brings Up to 6Gpx/sec (75Gbps) for Machine Vision Applications

    화요일, 7월 2, 2019 211 지난 일수

    WAYNE, NJ, June 28, 2019 – Vision Research, leading manufacturer of Phantom High-Speed cameras, introduces the Phantom S640 to their growing machine vision family. The Phantom S640 leverages the Phantom CMOS sensor used in the popular VEO640 camera and provides up to an astounding 6 Gpx/sec (75 Gbps) of streaming data and images for machine vision applications.

    계속 읽기
  •  Drexelbrook Offers New Point Level Measurement Probes with Full 3A Certification
    Drexelbrook Offers New Point Level Measurement Probes with Full 3A Certification

    월요일, 6월 24, 2019 219 지난 일수

    HORSHAM, PA – AMETEK Drexelbrook, a world leader in level measurement technology, has expanded its point level measurement offering with the new 700-3201 series of fully 3A certified Capacitance/RF Admittance probes, specifically designed for mid-level to premium point level measurement products within sanitary applications that require 3A approval.

    계속 읽기
  • AMETEK Sensors and Fluid Management Systems Selected to Supply Fuel Gauging System for AVIC XCAC MA700 Regional Turboprop
    AMETEK Sensors and Fluid Management Systems Selected to Supply Fuel Gauging System for AVIC XCAC MA700 Regional Turboprop

    목요일, 6월 20, 2019 223 지난 일수

    PARIS, FRANCE – AMETEK Sensors and Fluid Management Systems (SFMS), the global leader in sensor technology for a broad range of aircraft engine and airframe applications, announced today during a contract signing ceremony at the 53rd Annual International Paris Air Show that it has been selected by AVIC XAC Commercial Aircraft Co., Ltd (AVIC XCAC), a subsidiary of Aviation Industry Corporation of China, Ltd. (AVIC), to supply the fuel gauging system for the MA700 turboprop regional aircraft.

    계속 읽기